Slimline Track- is used in single track systems. Straight track can be used in any combination with curved track to meet the transfer requirements of any setting.  Standard track is also used as the parallel support rails of an XY gantry system

Supertrack- is normally used as a traversing boom for an XY gantry system.  It can also be used in installations where longer spans are required between supports, as in wall installations

Trackplus- is commonly used as the traversing boom for an XY gantry system.  The thicker profile allows it to span significant distances between supports

Curve Tracks

We carry as standard:

1. Slimline ceiling mounted curves in 90, 45, 15 and 10 degrees
2. Fineline recessed curves in 90 and 45 degrees

We can produce curves of any angle for customized needs, minimum quantities apply.

45 or 90 Degree Curve Track – curved tracks are used to change the direction of tracks in a single track system.  The 45 or 90 Degree Curve can be used in conjunction with straight or curved tracks.

These curved tracks are available in “inside” and “outside” designs to allow for the finished side of the track bracket to remain consistent throughout the installation.

Quick Curve- The quick curve is a 90 degree curve with a turning radius of 8” potentially avoiding the requirement for more costly installation options. Mounted only to the adjacent sections of straight track, the Quick Curve offers a more cost effective installation

Transstrip track- the transstrip track is used for Power XY gantry and Omni charge (constant charge) applications. The slot at the top of the track allows for the insertion of the Transstrip

Transstrip Supertrack- the transstrip track is used for Power XY gantry and Omni charge (constant charge) applications. The slot at the top of the track allows for the insertion of the Transstrip

Transstrip Trackplus- the transstrip track is used for Power XY gantry and Omni charge (constant charge) applications. The slot at the top of the track allows for the insertion of the Transstrip

Power Multi-Port Turntable- the power Multi-port turntable offers the end-user flexibility in situations that require access to a number of transfer locations.  The turntable provides 14 take-off points

Multi-Port Turntable 16 Port- the Multi-Port turntable offers 15 different ceiling track take-off points at 22 degree intervals. The turntable is easily rotated with the use of a simple pull mechanism

Quick-Fit Turntable- The Quick-Fit turntable allows for the directional change at 90 degree intervals. The turntable is rotated using a simple pull cord mechanism

Transition-Gate- The Transition-Gate enables a transfer bwtween an XY gantry and a single track. The Transition-Gate’s design does not require the use of any electrical components.  Simply driving the lift into the gate locks it in place to transfer to the other rail.  Also available for Track Plus